Factory Reverse Camera Not Triggering on Toyota LandCruiser 200 Series (2008–2015)

If the factory reverse camera is not triggering after installing your VHEDIA head unit in a Toyota LandCruiser 200 Series (VX, GXL, GX, and Altitude trims), follow the steps below to resolve the issue.

• Locate the 5-pin plug on the head unit's main harness.
• This plug contains orange and black wires and is responsible for the factory reverse camera trigger.
• Ensure that this plug is properly and securely connected to the corresponding plug from the vehicle. A loose or incomplete connection can prevent the reverse camera from activating.
• Refer to the photo below for visual guidance.

• Locate the 4-pin plug on the head unit's main harness.
• This plug connects to the factory plug from the vehicle to provide power to the factory reverse camera.
• Ensure the 4-pin plug is securely connected to the vehicle's factory plug.
• Refer to the installation video for a detailed guide on locating and connecting this plug.

If the issue persists after completing these steps, please contact VHEDIA support for additional troubleshooting assistance.

By following these steps, you should be able to resolve the issue and restore the functionality of your factory reverse camera.