Mitsubishi Triton MR 2018-2023 - Mic SWC not working

We recently rolled an APK to fix this issue. 

Steps:

1. Download and unzip: https://vhedia.com.au/wp-content/uploads/2023/11/Ts8667_user_kld006_377_1280x720-release-unsigned_sign.apk_.zip

2. Copy the unzipped file to a USB flash drive formatted as FAT32.

Next:

For X Series:

1. Insert USB preferably into the 3G USB cable port

2. Go to your apps (bottom of screen 9 pin pad)

3. Select File Browser

4. Under the Flash Icon select the USB with your file on it. If don't have anything else plugged into a USB port you should just see USB 1, if you have dash cam/dab etc you will have a couple of different USB.

5. Scroll down under you see the file name and tick the box on the right side of the file name. Select the paper symbol next to the scissors to copy the file.

6. Select the Flash icon on the top left of the screen and then press the paper symbol again at the bottom to paste. Your file will start to transfer over.

7. Test on your Triton this has worked.

For M Series:

1. Insert USB preferably into the 3G USB cable port

2. Bring up your apps screen by pressing the 4 square pad on the bottom left of your screen

3. Select File Manager

4. Under the Local Icon select the USB with your file on it. If don't have anything else plugged into a USB port you should just see USB 1, if you have dash cam/dab etc you will have a couple of different USB.

5. Scroll down under you see the file name and select the file name

6. It will come up with a prompt asking if you want to install, select install and after select done

7. Test on your Triton this has worked.

1. Set the volume

Settings > Car infotainment > Volume > BT call volume gain > Set to preference

2. Settings > Car infotainment > About Device > Tap the "tools" icon > Input code 8878 to factory setting > Volume > BT mic gain / BT Vol. Set to preference and test results