Suzuki Jimny Head Unit 2018+ Installation and Help Guide

1. Reverse Camera

• Q: My factory reverse cam is not working (No display at all or shows no signal error)
• A: Look for the green factory cam plug in our harness and remove PIN 2 and PIN 4.

Also, make sure that you have the correct camera format settings in our headunit. See video below:

• We have updated the cable (removing the orange/black and black wires) and included it in the package. However, if your kit does not include it, please follow the steps above.

2. Steering Wheel Controls

• Q: Steering Wheel Controls not working
• A: As the head unit does not have a CANBUS, the steering wheel controls need to be manually set or learned through the head unit. Follow the steps in the video below to set up the steering wheel controls.

You may also check our YouTube playlist here:

https://www.youtube.com/playlist?list=PLt1H441j-mBegGDv1ggLOOiVN7HzVB3DG