How to Use the 360 Camera Feature on a Nissan Navara 2015+ with VHEDIA Head Unit

The 360 camera functionality for Nissan Navara 2015+ can be seamlessly integrated with your VHEDIA head unit. Follow the steps below to set up and use the 360 camera feature effectively.

To enable the 360 camera feature, the CAN Type profile must be configured properly in the VHEDIA head unit settings.

Set the CAN Type to 6 for Nissan Navara 2015+. This profile ensures compatibility with your vehicle’s factory 360 camera system.

Go over to this link on how to set the correct CANBUS profile:

https://vhedia.tawk.help/article/m-series-how-to-set-can-bus-profle

Once the CAN Type is configured correctly, you can access the live 360 camera feed directly from your head unit screen:

• Locate the back button on your steering wheel controls.
• Press and hold it for 5-10 seconds.

• After holding the button, the 360 camera live view will appear on the head unit’s screen.
• This feature allows you to switch to the 360 camera view on demand, giving you an excellent perspective around your vehicle.

• Ensure that all wiring and connections for the 360 camera system are properly installed and secure.
• If the 360 camera view does not appear, double-check the CAN Type setting and try the activation process again.
• If you encounter issues, contact VHEDIA support for assistance.