M-Series: Reverse Camera NO SIGNAL Issue
Reverse Camera shows "No Signal" when you put the car on reverse
Alphie E
Last Update a month ago
In times when your factory reverse camera or the supplier reverse camera shows "No Signal" or not working at all after installing the head unit, below are the things you can try.
FACTORY REVERSE CAMERA:
- Make sure that the black "CAM IN" wire with yellow male RCA from the main harness is plugged into the purple "CAM IN" wire with yellow female RCA from the 6-pin auxiliary cable.
FOR VHEDIA SUPPLIED REVERSE CAMERA:
- Ensure that the 12v wire of the reverse camera is hooked up to the 12v wire of the reverse light.
- Make sure that the black "CAM IN" wire with yellow male RCA of the reverse camera is plugged into the purple "CAM IN" wire with yellow female RCA from the 6-pin auxiliary cable.
- Make sure that the green/red trigger wire is connected to the black/orange "REVERSE IN" wire on the main harness.
- You may also watch the video below for more detailed instructions:
To check if the reverse camera is faulty, try plugging it into the F-CAM input instead of the CAM-IN, then put the car into reverse. If the camera works, it may be a wiring issue. If it doesn’t, the reverse camera itself may be faulty.
If you need further assistance, please reach out to us via phone, email, or chat.