How to add/change the start up logo in your Vhedia Head unit
(SKUs: All Vhedia Head Units that start with MT-XXXX)
NOTE: The boot logo will only appear when the head unit undergoes a full start-up sequence or if the Sleep Mode setting is turned off.
STEPS:
1. Download a BMP image that you want to use as a boot logo. The resolution needs to match your device, e.g., 1280x720.
How to check screen resolution of your headunit:
Go to Settings > Car Infotainment > About Device > Enter 160 for password
The X and Y represent the width and height, respectively. The image intended for use as the boot logo must match this resolution and be in .bmp format.
2. Save the downloaded image on a USB flash drive.
3. Insert the flash drive into your head unit.
4. On the head unit, go to
File Manager >
USB 1.
5. Tap and hold the downloaded image, then select '
Copy.'
6. Go to
Local and paste the image in the root directory.
7. Select
Settings >
Car Infotainment >
About Device. Enter the password
8888. Choose
Boot Logo >
Search Icon >
Select Image.
8. When prompted to update, select
YES.
9. If the unit does not restart after 30 seconds, you may need to perform a hard reset. Use a small pin to press and hold the RST hole for 20-30 seconds. The unit should restart, and your new boot logo should appear.
