T-Series: How to Set Steering Wheel Controls (SWC) for Head Unit – Toyota LandCruiser 200 Series (2015–2022) Sahara & VX

If you've recently installed a VHEDIA Head Unit in your Toyota LandCruiser 200 Series (Sahara or VX, 2015–2022 models), you can easily set up the Steering Wheel Controls (SWC) to work seamlessly with your new system. Follow the step-by-step guide below to get your SWC functions up and running.

2. Go to Settings.

4. Tap on Steering Wheel Settings (also referred to as Steering Wheel Control Settings).

5. On the Wheel Settings screen, you’ll see virtual buttons representing common steering wheel functions (e.g., Volume Up, Volume Down, Mode, Track Forward/Backward, etc.).

6. Assign each button:

• Tap on a virtual button on the screen (e.g., Volume Up).
• Immediately after, press the corresponding physical button on your steering wheel.
• The head unit will recognise and map that steering wheel button to the function.

7. Repeat this process for all the other steering wheel buttons you want to configure.

• You can test the buttons right after setup to ensure they’re working correctly.
• If a button doesn't register, try reassigning it by repeating the same steps.
• Avoid pressing multiple steering wheel buttons at once during setup.

If you’re still experiencing issues with your Steering Wheel Controls after following these steps, feel free to contact VHEDIA Support or check our detailed video guide for visual instructions.