Volkswagen Amarok Head Unit 2011-2016 - Install and Help Guide
9613AM will be the SKU. This will give you some more guidance and help when installing our units into your Amarok
Kurt H
Last Update a year ago
Install Video
Q: Reverse Camera works on ACC but not when car started
A: You need to use the relay cable in our kit. See pic below:
Black wire (GND) - Connect with the black GND wire from main 20-pin harness
Red wire and Yellow wire - Connect with the Orange/Black reverse-in wire from main 20-pin harness
White wire - Connect with your car reverse light, there is 12v when the gear is on reverse or by the 12v trigger of your aftermarket camera
If your harness comes with CANBUS:
If your harness has no CANBUS
If this cable is not in your kit, let us know via email, live chat, or phone to get it sorted for you.
You can also use a camera filter like the one below
Here's how to wire the Camera Filter included in the kit:
1. OUT - Connect the cables (RED and BLACK) to the Video Cable of the Reverse Camera accordingly.
RED > RED
BLACK > BLACK
2. IN - Connect the BLACK cable to the ground and the RED cable to the positive circuit of the Reverse Light.
Refer to the diagram below for reference:
Q: Your supplied reverse camera works but shows static display like TV with no station
A: You need to set the correct camera setting. See video below for guide but setting should be:
Cam Type: AHD
Cam Format: 720P-25