T-Series: Nissan Patrol Y62 Head Unit – Reverse Camera RCA, Connecting a Rear Screen, and Post-Install Settings
Applies to SKU: T-1222G-A13
Alphie E
Last Update a month ago
If you have installed a VHEDIA T-Series head unit in your Nissan Patrol Y62 and need guidance on setting up the reverse camera, connecting a rear screen, or adjusting post-install settings, this guide will walk you through the process.
I. Reverse Camera
- If your reverse camera feed is not displaying on the head unit and instead shows a "No Signal" message, try both yellow RCA connectors to determine the correct cable for the reverse camera input.
II. Connecting a Rear Screen
- There are two male RCA in the kit both labeled as "CAMERA" make sure to use the RCA connected to the bigger plug on main harness. See the wiring diagram below for your guide:
III. Post-Install Settings
- Audio & Display Tweaks: Adjust the EQ settings and brightness for optimal performance.
- Steering Wheel Controls (SWC): Re-map buttons via Settings > SWC.
- Default Apps: Set your preferred navigation and media applications.
- Wi-Fi & Bluetooth: Connect to your network and sync devices for full functionality.
For a full step-by-step walkthrough, watch our video guide: