Toyota Prado GXL 2009-2013 - Install and Help Guide
1705NC, 1705GX, 1705VX and will be the SKU. This will give you some more guidance and help when installing our units into your Hilux SR5
Kurt H
Last Update 2 years ago
Install Video
Q: I have your M Series. My factory reverse camera is not working, just shows static display
A: You need to set the correct camera settings. See video below.
Q: My reverse camera works but is glitchy or stuck.
A: For this one, you need to use the relay cable included in the kit.
Black wire (Ground) - Connect to black wire from main 20-pin harness
Yellow wire (B+) - Connect to yellow B+ wire from main 20-pin harness
Red wire - Connect to orange/black REVERSE IN wire from main 20-pin harness
White wire - Connect to your car reverse light wire, should have 12v when you put gear in reverse
Q: I have 1705NC and have the following issues.
- I can't pick up AM stations.
- Where to plug the reverse camera trigger
- How to wire the rocker panel
A: See wiring below.
