Isuzu D-Max 2020+ - Install and Help Guide

MT-1951 will be the SKU. This will give you some more guidance and help when installing our units into your D-Max 2020+

Alphie E

Last Update a month ago

Install Video

Q: Radio Reception is not good. (Scan am and no stations and FM is staticy) 

Step-by-Step Fix:

  1. Locate the radio adapter included in your VHEDIA kit.
    This is the small plug that connects between your vehicle's antenna and the back of the VHEDIA head unit.

  2. Find the black wire coming out of this adapter.
    It is not needed for antenna power in this setup.

  3. Cut or disconnect this black wire.

    • You can tape the exposed end if you like, to keep things neat.

    • Once cut, the antenna receives proper power, and reception should significantly improve.

Q: Phone button in my Steering Wheel Control is not working
A: The KEY2 wire on our older cable is placed in the empty pin number 4 shown on the pic below. You need to move the wire into where it is located now (We sorted this out in our newer cables)

Was this article helpful?

0 out of 0 liked this article

Still need help? Message Us